Used Jeep Engines of the Highest Quality—Tested, Certified, and Warrantied

Trustworthy Used Jeep Engines

You don't always have to buy a new Jeep when your engine breaks down. A used Jeep engine that has been tested and certified will bring back your power, performance, and reliability without the high cost of a new or remanufactured engine.

We get our used Jeep engines from donor vehicles with low mileage, check them out carefully and test them to make sure they meet OEM standards. A used engine is the best choice for a Wrangler, Grand Cherokee, Compass, Patriot, Cherokee, Renegade, or Gladiator because it is both high quality and cheap.

What sets a good used Jeep engine apart?

A high-quality used Jeep engine isn't just taken from a scrapyard; it is checked, tested, and confirmed to work well and last a long time.

Before being sent out, each engine goes through:

Testing for leaks and compression

Fluid analysis and oil pressure

Check the cylinder and head

Checking the mileage

Cleaning and sealing before installation; checking the VIN to make sure it fits perfectly

Before a used Jeep engine can be sold, it must meet OEM performance standards.

Used vs. Rebuilt vs. Remanufactured Engines

Used Jeep engines are the best value for OEM reliability, so they are great for daily drivers, off-road fans, and repair professionals.

Certification and Warranty You Can Trust

Every used Jeep engine is tested, documented, and comes with a warranty that lasts from 6 months to 2 years, depending on how many miles it has and what it is used for.

Each engine comes with:

Confirmed reports of compression and leakdown

Proof of mileage

Checking for a clean title

VIN-based fitment certification

Guide to registering your warranty and installing it

You can see everything clearly and feel safe before installation.

Fits All Jeep Models

We sell used engines for almost all Jeep models made between 2000 and 2024, such as:

• Wrangler and Wrangler Unlimited Jeep
• Grand Cherokee Jeep
• Cherokee Jeep
• Jeep Compass
• Renegade Jeep
• Patriot Jeep
• Jeep Gladiator
• Jeep Commander
• Jeep Liberty

Giving your VIN makes sure that your engine code and configuration fit perfectly.

Benefits of Cost

A used Jeep engine usually costs 50–70% less than a new OEM unit, and when installed correctly, it will fit and work just as well.

Average price ranges:

$2,400 to $3,800 for a Jeep Wrangler 3.6L

The price of a Jeep Grand Cherokee 5.7L HEMI is between $3,000 and $4,800.

The price of a Jeep Compass 2.4L is between $1,800 and $2,900.

The price of a Jeep Cherokee 3.2L V6 is between $2,200 and $3,600.

Jeep Patriot 2.0L / 2.4L: $1,500 to $2,500

These savings make used Jeep engines a smart and cheap way to make your car last longer.

Help with shipping and installation

All used Jeep engines are packaged and palletised by professionals so they can be safely shipped. We can deliver anywhere in the country, and we also offer liftgate service for homes and businesses.

Depending on where you live, the usual delivery time is 3 to 7 business days.

We also give you a list of recommended installers and step-by-step installation guides to make sure your warranty is valid.

"A tested used Jeep engine brings back tough performance, power, and dependability without the cost of buying a new one."

When is it time to get a new Jeep engine?

If you see any of the following, you might need a new engine:

• Sounds like knocking or rattling coming from the block
• Too much heat or a broken head gasket
• Low compression or misfires
• A lot of oil leaks or oil sludge
• Failure of the bearing or timing chain
• Total engine lockup

In many cases, getting a certified used engine is faster, cheaper, and more reliable than making repairs over and over again.

A choice that is good for the environment and lasts long

Picking a used engine is good for the environment. You can help save energy and keep your Jeep on the road longer by reusing OEM parts. This cuts down on waste and emissions from manufacturing.