MINI Cooper S Turbo Replacement: N14, N18 or B48 Fitment, Cost and Checks
Which turbo fits your MINI Cooper S (N14, N18 or B48), why N14 oil lines kill turbos, what replacement costs and what to check before you buy.

Quick answer: Before you order a MINI Cooper S turbo replacement, pin down the engine. 2007-2010 US Cooper S models use the N14, 2011-on R-series cars use the N18, and 2014-on F-series cars use BMW's 2.0-liter B48 family. Their turbos don't interchange. Confirm the turbo is really bad, fix whatever starved it of oil, then get a used MINI turbo quoted against your VIN.
Most MINI turbo jobs that go wrong were wrong at the ordering stage. Somebody bought "a Cooper S turbo" for a 2010 car that turned out to have the later engine, or bolted a good turbo onto an oil feed line that had already cooked shut. This guide is about avoiding both.

Which turbo does your MINI Cooper S have?
Start here, because everything else depends on it. MINI changed engines twice in the turbo era, and each change brought a different turbo, different oil plumbing and different mounting.
Generation (US) | Model years | Engine | What to know |
|---|---|---|---|
R56 / R55 / R57 Cooper S | 2007-2010 | 1.6L N14 turbo | 171 hp, single VANOS. Known for turbo oil-supply problems |
R56 / R55 / R57 / R60 Cooper S | 2011 on | 1.6L N18 turbo | 181 hp, double VANOS and Valvetronic, revised oil-line heat shield |
R56 John Cooper Works | 2009 on | 1.6L turbo (higher output) | 208 hp on the 2009 N14 JCW. Treat it as its own application |
F56 / F55 / F57 Cooper S | 2014 on | 2.0L B48 family | Four-cylinder BMW modular engine. Some US cars carry the B46 code |
F56 Cooper (non-S) | 2014 on | 1.5L B38 three-cylinder | Also turbocharged, and a completely different turbo |
Engine and output figures for the R-series come from Pelican Parts' R56 engine management reference. Production switched from N14 to N18 during 2010, so a car built near the changeover needs its engine code confirmed, not guessed from the model year. A quick tell from the hood, as Autocar's used Cooper S buying guide notes: the N18 wears a large plastic engine cover, while the N14 is bare on top. Our VIN decoder confirms the rest.
Clubman, Countryman, Paceman, Coupe and Roadster Cooper S models follow the same engine families for their years, but brackets, pipes and part numbers can differ by body. That's why we match by VIN and part number, not by "it's a Cooper S."
The N14 problem: the oil line kills the turbo
If you own a 2007-2010 Cooper S, read this section twice.
MINI's own service information SI M11 05 13, filed with NHTSA in October 2013, says that after the engine is switched off, heat radiating from the turbo can make oil solidify inside the turbo oil supply line. That narrows the line and damages the turbo bearings. The fix was an insulated heat shield on the line for N14 cars built from November 2006 to December 2009. Cars that got it have code 62 punched out on the B-pillar label.
A second MINI bulletin on turbo failure (oil supply and return line blockage) describes the complaint as loss of performance and turbo noise, and the cause as oil starvation that seizes the turbo. Its instruction is blunt: on every turbo replacement, remove and inspect the oil supply and return lines and replace them, with their banjo bolts, if there is any blockage.
Our take: on an N14, budget for a new oil feed line with the turbo, full stop. Inspecting a coked line is harder than replacing it, and a $1,000 turbo fed through a half-blocked line is a turbo you'll buy twice.

The N18 brought several changes that look aimed at the same weak spots: a heat shield over the turbo oil pipe, a rigid turbo intake pipe instead of the flexible one, and revised crankcase ventilation. The N18 is the better-sorted engine, but the same rule applies. A turbo that died from oil starvation will take its replacement with it unless the cause is fixed.
Is it actually the turbo?
Plenty of MINIs get a turbo they didn't need. Low boost can be a split charge hose or a stuck wastegate. Blue smoke can be the PCV system. A whistle can be a leaking intercooler joint. Before ordering, have a shop do three things:
- Pull the intake pipe and check the compressor wheel for side-to-side shaft play, blade damage and wet oil.
- Smoke-test the intake and charge-air side for boost leaks.
- Log actual boost against requested boost with a scan tool.
Our signs of a bad turbo guide walks through each symptom and the non-turbo causes behind it.

What a MINI Cooper S turbo replacement costs
RepairPal's estimate for a MINI Cooper turbocharger assembly replacement (last updated September 3, 2026) is $4,542 to $5,013, with labor at $1,009 to $1,480 and parts at around $3,533. That parts figure reflects a new assembly. See the RepairPal MINI Cooper turbo estimate for the year-by-year spread.
A used OEM turbo changes the math. Our used MINI turbocharger page lists estimated used price ranges as of November 2026:
MINI model | Estimated used turbo price |
|---|---|
Cooper S | $700-$1,400 |
John Cooper Works | $900-$1,800 |
Countryman (turbo) | $800-$1,600 |
Clubman (turbo) | $850-$1,700 |
Prices vary by year and engine, and your quote has the real number. Add RepairPal's labor range and you're looking at roughly $1,700 to $2,900 before the extras below, against $4,500-plus for a new assembly installed. Our turbo replacement cost breakdown covers what else ends up on the invoice.
Is that worth it? On a clean car with healthy compression, usually yes. On an N14 that's already burning a quart every 1,000 miles and rattling its timing chain at cold start, spend the money on a diagnosis of the whole engine first. A fresh turbo won't fix worn rings.
Before you order: a 7-step checklist
- Confirm the engine code. N14, N18, B48/B46 or B38, from the VIN, the engine cover or the engine itself.
- Match the part number on the old turbo's tag or housing. JCW and Cooper S are separate applications.
- Prove the turbo is bad with shaft play, a smoke test and boost logging.
- Find the cause. Oil level history, coked or kinked feed line, blocked return line, PCV faults.
- Check the B-pillar label on N14 cars for code 62 (the oil-line heat shield action).
- Order the supporting parts: oil feed line, banjo bolts and sealing washers, return line gaskets, turbo-to-exhaust gaskets, oil and filter.
- Plan the first start: prime the turbo with oil and change the oil again after the first run if debris came from the old unit. Our turbo replacement checklist has the full procedure.
For deeper part-number matching, see our main guide to buying a used turbocharger by part number.
Used, rebuilt or remanufactured for a MINI?
For a daily-driven Cooper S with average miles, a tested used OEM turbo is the value pick: factory part, factory calibration, a fraction of the new price. A remanufactured unit makes more sense if you plan to keep the car for years and want a longer warranty. A cheap rebuilt turbo of unknown origin is the one we'd avoid. We compare the trade-offs in detail in used vs remanufactured turbochargers.
Every used turbo on our MINI page is listed as coming from a running donor car. It's checked for compressor and turbine wheel damage, shaft play, housing cracks, actuator function and contamination in the oil ports, then matched by VIN or part number before it ships. The warranty term is written on your quote, and our warranty policy and return policy spell out the details.
FAQ
How do I tell if my MINI has the N14 or the N18?
US 2007-2010 Cooper S models have the N14 and 2011-on R-series cars have the N18. Because production changed during 2010, check the engine code on the VIN decode or the engine itself. As a visual clue, the N18 has a large plastic cover over the top of the engine, while the N14 does not.
Is a John Cooper Works turbo the same as a Cooper S turbo?
Don't assume it is. The JCW makes more power than the Cooper S on the same engine family (208 hp versus 171 hp on the 2009 N14 cars), and its turbo is a separate application. Match the part number on your old turbo and order by VIN.
How much does a MINI Cooper S turbo replacement cost?
RepairPal puts a turbo assembly replacement on a MINI Cooper at $4,542 to $5,013 with a new part (September 2026 estimate). With a used OEM turbo, estimated at $700 to $1,400 for a Cooper S on our MINI turbo page, plus RepairPal's $1,009 to $1,480 labor range, the job comes to roughly $1,700 to $2,900 before gaskets, lines and fluids.
Do I need a new oil feed line when I replace the turbo?
On an N14 we'd say yes. MINI's own bulletin blames oil solidifying in the feed line for bearing damage, and its turbo failure bulletin says to inspect the supply and return lines on every replacement and replace them if restricted. A new line is cheap insurance for the new turbo.
Can I keep driving with a failing MINI turbo?
Not for long. If you hear grinding or loud whining, see heavy smoke, or watch the oil level drop, stop driving. A turbo shedding parts or oil can damage the engine and catalytic converter. If it's only down on power with no noise or smoke, drive gently to a shop and have a qualified mechanic confirm the cause.
Is a used turbo worth it on a high-mileage MINI?
Often, yes, if the engine itself is healthy. Have compression and oil consumption checked first. A used OEM turbo on a sound engine is good value; on a tired engine that's burning oil, the money is better spent on a diagnosis or a replacement engine.
Next step
Send us your VIN and the part number from your old turbo through our parts quote form, or browse used MINI turbochargers and MINI parts by brand. We'll confirm the engine, match the turbo and put the price, warranty and freight on the quote.
Last updated: November 18, 2026. Images are illustrations, not photos of a specific in-stock part.