Hyundai Palisade Engine Replacement: 3.8 V6 Fitment, Recall Check and Buying Options
2020-2025 Palisade engine replacement: check recall 24V-106, confirm the 3.8 V6 fit, and compare used vs reman options.

Quick answer: Every 2020-2025 Hyundai Palisade sold in the US uses the 3.8L Lambda II V6. Before you buy a replacement, run your VIN through NHTSA's recall lookup, because some 2024 models qualify for a free engine under recall 24V-106. If yours doesn't, match the engine to your VIN, compare used and remanufactured 3.8 units, and send us your VIN for a quote.
That's the short version of Hyundai Palisade engine replacement. The longer version matters, because a Palisade engine is expensive, and the two most common buyer mistakes we see are paying for an engine the factory would have replaced for free, and buying the wrong generation of engine.
Last updated: November 2026

Which engine does your Palisade have?
Short answer: if it's a 2020 through 2025, it's the 3.8 V6. If it's a 2026 or newer, it's a different engine family, and the 3.8 will not drop in.
Hyundai's published specs make the split clear:
Model years (US) | Engine | Displacement | Output | Transmission |
|---|---|---|---|---|
2020-2025 | 3.8L Lambda II V6, Atkinson-cycle GDI, D-CVVT, 24 valves | 3,778 cc | 291 hp @ 6,000 rpm, 262 lb-ft @ 5,200 rpm | 8-speed automatic, FWD or HTRAC AWD |
2026+ | 3.5L V6 (MPI + GDI) | 3,470 cc | 287 hp | Confirm with your VIN |
2026+ hybrid | 2.5L turbo four-cylinder hybrid | 2,497 cc | Confirm with your VIN | Confirm with your VIN |
Sources: Hyundai 2024 Palisade specifications and Hyundai 2026 Palisade specifications.
A few details from Hyundai's spec sheets are worth knowing when you talk to a supplier. The 3.8 has an aluminum block and heads, runs a 13.0:1 compression ratio on regular unleaded, and holds 6.9 liters (about 7.3 quarts) of oil. The 8-speed automatic in the 2020-2025 trucks is the A8LF1.
Model year alone isn't proof. Run the full 17-digit VIN through our free VIN decoder and keep that printout handy. It answers the drivetrain question (FWD or AWD) and gives any engine supplier what they need to confirm the build.
Check the recall before you buy anything
Is there a recall on the Palisade engine? Yes, for a specific group of 2024 models. NHTSA recall 24V-106 (Hyundai campaign 255) covers 4,245 model year 2024 Palisades produced between August 21 and October 12, 2023. Hyundai's filing says valve springs in these engines may fracture, which can cause a sudden loss of motive power and, in rare cases, a hole in the engine block. (NHTSA recall report)
The remedy is an engine sub-assembly replacement at no cost to the owner, done by a Hyundai dealer under TSB 24-01-039H-2. (Hyundai dealer recall notice)
So the first step for any 2024 owner is free and takes two minutes: enter your VIN at NHTSA's recall lookup. If an open recall shows up, stop shopping and call a Hyundai dealer. A free factory engine beats anything you or we can buy.
If your Palisade isn't on the list, or it's a 2020-2023 or 2025, keep reading.
Safety note: a sudden loss of power at speed is dangerous. If your engine cut out, knocked hard, or dumped oil or coolant, don't keep driving it to "see what happens." Have it towed, and have a qualified mechanic confirm the engine is the actual failure before you order a replacement.
Used, remanufactured or long block?
Once you know you're paying, the real decision is which kind of 3.8 to buy. Here's how the main options compare:
Option | What you get | Best for | What to confirm |
|---|---|---|---|
Used (low-mileage pull) | A complete engine removed from a donor Palisade | Owners keeping cost down on a higher-mileage truck | Donor mileage, how it was tested, what's included, return terms |
Remanufactured | An engine rebuilt to a spec, with wear parts replaced | Owners keeping the Palisade long term | What was replaced, warranty length and labor coverage, core charge |
Long block | Block, heads and internals, usually without intake, injectors and sensors | Shops comfortable moving parts over from the old engine | Exactly which parts transfer and their condition |
Our opinion: on a 2020-2021 Palisade with high miles, a tested low-mileage used 3.8 is usually the sensible money. On a 2023-2025 that you plan to drive another 100,000 miles, a remanufactured engine with a strong warranty is easier to justify. For the deeper trade-offs, see our remanufactured engine buying guide and the main guide to choosing a used engine.

What to check on a replacement 3.8 V6
This is the list we'd run through before paying for any Palisade engine, from us or anyone else:
- VIN match. Give the seller your full VIN, not just "2021 Palisade." Ask them to confirm the replacement matches your build.
- FWD or AWD. Ask whether anything on the engine side differs between FWD and HTRAC AWD versions for your year, and confirm it against your VIN. Don't assume.
- Donor mileage, documented. A mileage claim should come with something you can check. Our guide on how to verify used engine mileage covers what proof to ask for, and a vehicle history report on the donor VIN helps.
- Testing. Ask how the engine was tested: compression, leak-down, or a run test before removal. Get the numbers if they exist.
- Direct-injection wear. The 3.8 is a GDI engine. Ask about injector condition and intake valve carbon, especially on higher-mileage used units.
- What's included. Intake manifold, injectors, fuel pump, sensors, wiring and accessories vary a lot between sellers. Get it in writing.
- Warranty, core and returns. Read the actual terms before you buy. Ours are on the warranty policy and return policy pages, so check the details for the engine you're quoted.
What to replace with the engine
The engine swap is the cheapest time to replace parts that are already out and easy to reach. Ask your shop about:
- Coolant hoses, thermostat and coolant
- Engine and transmission mounts
- Fresh oil, filter and any fluids that get drained
- Spark plugs and gaskets if they aren't already new on the replacement
One more thing before you install anything. If the old engine died from overheating or oil starvation, find out why. A cooling or oiling problem that killed the first 3.8 will happily kill the second.
How long does a Palisade engine swap take?
There's no single answer, but Hyundai's own recall paperwork gives a useful reference point. For the 24V-106 recall, Hyundai pays dealers 9.5 labor hours for the engine sub-assembly replacement on FWD Palisades and 9.8 hours on AWD models, alignment included (Hyundai dealer recall notice).
Treat that as the dealer recall time for that specific job. An independent shop's quote may be higher or lower depending on what comes with the replacement engine and how many parts have to be swapped over. Get the labor quote in writing before you order.

Is Hyundai Palisade engine replacement worth it?
Usually, yes. A 2020-2025 Palisade is a relatively young three-row SUV that holds its value, so putting a sound 3.8 in a clean body tends to make more sense than it does on a 15-year-old car.
Where we'd hesitate: a high-mileage truck that also has transmission problems, rust, or a lot of deferred maintenance. Price the engine, the labor and those other repairs together, then compare that total with what the Palisade is worth. Our guide on whether it's worth replacing an engine walks through that math.
If you have a different Hyundai V6, our Santa Fe 3.3L V6 engine guide covers a similar core and accessory checklist.
FAQ
What engine is in a Hyundai Palisade?
The 2020-2025 Palisade uses a 3.8L Lambda II V6 (3,778 cc) rated at 291 hp and 262 lb-ft, paired with an 8-speed automatic and FWD or HTRAC AWD. The redesigned 2026 Palisade switched to a 3.5L V6 or a 2.5L turbo hybrid, according to Hyundai's specifications.
Is there a recall on the Palisade engine?
Yes. NHTSA recall 24V-106 covers 4,245 model year 2024 Palisades built between August 21 and October 12, 2023, for valve springs that may fracture. The fix is a free engine sub-assembly replacement at a Hyundai dealer. Check your VIN at nhtsa.gov/recalls.
Will a 2026 Palisade engine fit my 2022?
No. The 2026 Palisade uses a different engine family (a 3.5L V6 or 2.5L turbo hybrid) than the 2020-2025 3.8L V6. Buy a 3.8 that matches your VIN for a 2020-2025 truck.
How long does a Palisade engine replacement take?
For the 24V-106 recall, Hyundai pays dealers 9.5 labor hours on FWD models and 9.8 hours on AWD, alignment included. That's the dealer recall time for that job, not a universal quote, so get a written labor estimate from your shop.
Should I buy a used or remanufactured engine for my Palisade?
On a higher-mileage 2020-2021 truck, a tested low-mileage used 3.8 usually makes the most financial sense. On a newer Palisade you plan to keep, a remanufactured engine with clear warranty terms is easier to justify. Either way, confirm the VIN match and what's included.
What do I send for an engine quote?
Your full 17-digit VIN, the mileage on your Palisade, whether it's FWD or AWD, what happened to the old engine, and your ZIP code for shipping. That's enough for us to check what we can source and what it includes.
Next step
Send us your VIN through the parts quote form and we'll check which 3.8 V6 options we can source for your Palisade. You can also browse used engines or the full range of Hyundai parts. And if your 2024 hasn't been checked for recall 24V-106 yet, do that first.