Skip to content

Mon–Fri 8am–7pm · Ships to all 50 states

Kia Sorento 2.4 Remanufactured Engine: 2011–2020 Fitment, Price and Warranty

Kia

Kia put four different 2.4 engines in the Sorento from 2011 to 2020. Find the reman long block that fits yours, plus price and warranty.

Car engine bay viewed from above during service

The Kia Sorento 2.4 is one of the most common SUVs we quote engines for. It is also one of the easiest to get wrong: between 2011 and 2020 Kia used four different 2.4L engines in the Sorento, and two of them overlap in the same model years.

Here is how to match the right Kia Sorento 2.4 remanufactured engine to your SUV before you buy.

Which Sorento 2.4 engine do you have?

We stock four remanufactured 2.4L long blocks that cover the Sorento:

  • 2011–2013 Sorento 2.4 MPI (port injection) – Part # RGG4KE24. Starting at $2,600.
  • 2012–2013 Sorento 2.4 GDI (direct injection) – Part # RGKJSDN24. Starting at $2,800.
  • 2014–2015 Sorento 2.4 – Part # RGKJSUV24. Starting at $3,000. Same engine family as the 2014–2016 Sportage 2.4 and 2013–2016 Santa Fe 2.4.
  • 2016–2020 Sorento 2.4 – Part # RGKJNW24. Starting at $2,800. Shared with the 2015–2019 Sonata 2.4 and 2016–2020 Optima 2.4.

The 2012–2013 trap: MPI or GDI?

Both the MPI and GDI 2.4 engines were offered in 2012–2013 Sorentos. They look similar from the top but use different fuel systems, intake parts and engine computers, so they are not interchangeable.

Ways to tell them apart:

  • Check the engine cover or emissions label under the hood for "GDI"
  • Look for a high-pressure fuel pump on the cylinder head (GDI only)
  • Decode the VIN with our free VIN decoder

The simplest route: send us the VIN on a parts quote request and we confirm the engine before anything ships.

Check recall and extended warranty coverage first

Several Kia 2.4L Theta II engines from this period were covered by recalls and extended engine warranty programs. Run your VIN on the NHTSA recall site and call a Kia dealer before you buy a replacement. If Kia will cover it, take that. If not, a reman long block with a written warranty is the next safest bet.

What's included with a Sorento 2.4 reman engine

Each Sorento 2.4 long block ships with:

  • Remanufactured long block
  • Timing cover
  • Oil pan
  • Gasket set

Your shop transfers the intake, exhaust manifold, sensors and accessories. For a full breakdown, see what comes with a remanufactured long block engine.

Sorento 2.4 engine price and warranty

  • Base price: $2,600 to $3,000 depending on year
  • Refundable core deposit: $300
  • Freight: $450 LTL round trip, including return of your old core
  • Warranty: 3 years / 100,000 miles, with labor coverage at $50/hr
  • No-fault coverage: included one time on 2012–2020 GDI engines; $200 option on the 2011–2013 MPI

Read the full terms on our warranty policy page. Prices reflect current stock and your written quote is final.

Is a reman engine worth it for an older Sorento?

If the body, transmission and AWD system are healthy, a remanufactured engine usually costs far less than replacing the SUV. A few quick checks before you commit:

  • Transmission shifts cleanly and fluid isn't burnt
  • No major rust on the subframe
  • AWD system (if equipped) engages without binding

If those pass, a fresh long block with a 3-year warranty can add years of use.

Get your Sorento 2.4 quote

Send your VIN, mileage and ZIP code through the quote form and we'll confirm fitment and send a written price with freight and core included. More Kia parts are available, or contact us directly.

Related pages