Skip to content

Mon–Fri 8am–7pm · Ships to all 50 states

Hyundai Santa Fe 2.4 Remanufactured Engine: Which Long Block Fits 2010–2020?

Hyundai

Santa Fe 2.4 engine replacement made simple: three reman long blocks cover 2010–2020. Match by year and VIN, then compare price and warranty.

Car engine bay viewed from above during service

The Hyundai Santa Fe 2.4 four-cylinder powered three generations of the SUV, including models sold as the Santa Fe Sport. Each generation used a different 2.4L engine, so the year of your Santa Fe decides which replacement fits.

Here's how to choose the right Hyundai Santa Fe 2.4 remanufactured engine.

Santa Fe 2.4 engine fitment by year

  • 2010–2012 Santa Fe 2.4 MPI – Part # RGG4KE24. Starting at $2,600. Port-injected engine shared with the 2010–2013 Tucson and Sportage 2.4 MPI and 2011–2013 Sorento 2.4 MPI.
  • 2013–2016 Santa Fe 2.4 – Part # RGKJSUV24. Starting at $3,000. Shared with the 2014–2015 Tucson 2.4, 2014–2016 Sportage 2.4 and 2014–2015 Sorento 2.4.
  • 2017–2020 Santa Fe 2.4 – Part # RGKJNW24. Starting at $2,800. Shared with the 2015–2019 Sonata 2.4, 2016–2020 Optima and Sorento 2.4, and 2017–2022 Sportage 2.4.

Hyundai's badging changed during these years (Santa Fe, Santa Fe Sport, Santa Fe XL), and the XL used a V6. Confirm your engine with our free VIN decoder, or send us the VIN and we'll do it for you.

Got the 3.3 V6 or the 2.0 turbo instead?

Not every Santa Fe has the 2.4. We also stock reman long blocks for the Santa Fe 3.3 V6 and 2.0T. Mention your engine on the quote form and we'll match it.

Check recalls before you buy

Some Santa Fe Sport 2.4 GDI engines were part of Hyundai's Theta II engine recalls and extended warranty program. Look up your VIN on the NHTSA recall site and call a Hyundai dealer first. If factory coverage applies, use it. If it doesn't, a remanufactured engine with a written warranty is the next best route.

What's included with a Santa Fe 2.4 reman engine

  • Remanufactured long block
  • Timing cover
  • Oil pan
  • Gasket set

Your intake, exhaust manifold, sensors and accessories carry over from the old engine. Here's a deeper look at what comes with a remanufactured long block.

Santa Fe 2.4 engine cost and warranty

  • Base price: $2,600 to $3,000 depending on generation
  • Refundable core deposit: $300
  • Freight: $450 LTL round trip, covering delivery and your core return
  • Warranty: 3 years / 100,000 miles, labor coverage at $50/hr
  • No-fault coverage: included one time on 2013–2020 engines; $200 option on the 2010–2012 MPI

Full terms are on our warranty policy page. Prices reflect current stock and your written quote is the final number.

Tips for a smooth Santa Fe engine swap

  • Replace the thermostat, water pump and coolant hoses while the engine is out
  • Flush or replace the oil cooler lines if the old engine spun a bearing
  • Prime the oil system before first start
  • Change oil and filter after the first 500 miles

These steps protect your new engine and your warranty.

Get a Santa Fe 2.4 quote

Send your VIN, mileage and ZIP code using our parts quote form. We confirm fitment and send a written quote with freight and core included. More Hyundai parts are available, or reach us here.

Related pages